ptfe tubing 3d printing have a history of headaches that are easy to plug! Many people suspect that because the temperature of the pipe is too high, many manufacturers have now switched to the built-in Teflon pipe. The thermal conductivity of Teflon and stainless steel is low, which can effectively reduce the temperature of the pipe. Teflon pipe is used. The plug failure rate is significantly reduced.
ptfe tubing 3d printing Teflon performance:
- Non-tacky: Teflon is inert, almost all materials are not bonded to Teflon, and very thin films also show non-adhesive properties.
2, resistance to heat and cold: Teflon has excellent heat resistance and low temperature resistance. Short-term temperature can reach 300 ° C, melting point 327 ° C, 380 ° C does not melt, general work can be used continuously between 240 ° C ~ 260 ° C, with significant thermal stability, it can work at freezing temperature Not embrittled, cold resistant to 190 ° C.thin wall ptfe tubing
- Lubricity: Teflon has a lower coefficient of friction. The friction coefficient changes when the load slides, but the value is only between 0.04-0.15.
4, non-hygroscopic: Teflon tube PTFE tubing surface does not touch water and oil quality, it is not easy to dip the solution during production operation, such as sticking a small amount of dirt, can be removed by simple wiping. Short downtime, saving time and increasing productivity.
5, corrosion resistance: Teflon tube PTFE tubing is almost immune to chemical attack, can withstand all the strong acids (including aqua regia), strong alkali, strong except for molten alkali metal, fluorinated medium and sodium hydroxide above 300 °C The action of oxidants, reducing agents and various organic solvents protects parts from any type of chemical attack.
6, weather resistance: no aging, the best non-aging life in plastics.
7, non-toxic: within 300 ° C of the normal environment, physiologically inert, non-toxic for medical and food equipment.
ptfe tube 3d printer Due to the excellent performance of Teflon, it is widely used at present, and can be used for pipeline anti-corrosion, high temperature resistance and corrosion resistance. Lubrication and other engineering, electronics, electrical, aerospace, medical and other harsh environments.
Aokeray specializes ptfe tube 3d printer in R&D and sales of fluoroplastic materials (FEP, PFA, PTFE, etc.), with advanced equipment and experienced R&D team, and cooperates with Huawei, Midea, ZTE, Intel, AirTAC and Foxconn. The company’s main products are PTFE tube, polyfluoroethylene propylene tube, soluble PTFE, polyvinylidene fluoride, and can process and produce various specifications of fluoroplastic products according to customer requirements.more heat shrink tubing custom