FEP heat shrink tubing

FEP Heat Shrink Tubing Aokeray

Available in 1.3:1, 1.6:1,2:1 at various sizes

Aokeray FEP heat shrink tubing contains the high standards and qualities for which our heat shrinks are renowned and is available in 1.3:1 and 1.6/2:1 shrink ratios.

There are many ways to account for shrinkage, including using ovens and performance heat guns (usually ovens may provide the most uniform shrinkage results).

Aokeray’s FEP heat shrink tubing:

Fep Heat shrink tubing medical grade , manufacturer Aokeray custom :
ID0.9mm to15mm inch as ID0.035″ TO 0.6″ ,The wall thickness 0.1mm to 0.5mm inch 0.0039″ TO 0.02″.
FEP SHRINK TUBING Turnkey services available for custom shrinking, etching and laser marking
FEP (Fluorinated Ethylene Propylene) is a modified category of PTFE. It basically retains the properties of PTFE, like excellent high- low temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50°C lower than PTFE by limit of high temperature resistance.
Electrical reliability, high insulation: 60hz-60MHZ under high and low temperature dielectric often stick to 2.1. Although the surface damage by diving, also won’t produce conductive orbit. >1018UM volume resistance, surface resistance>10130, arc resistant >165 seconds No leakage

FEP heat shrink tubing 1.3:1

Medical-grade shrink FEP tubing with a 1.3:1 shrinkage is available in a wide range of product sizes, but there are limitations to this 1.3:1 shrinkage. For medical device products with irregular shapes and lengths, Aokeary can also customize FEP tubing to meet your needs.
More complete FEP Heat Shrink tubing Guide , please refer .

fep heat shrink 1.3:1 ,2:1,1.6:1